AF779 Multi-Connector Adapter

{"Brand":"AFCON","Figure Number":"AF779","Material":"Steel","Finish":"Plain, Electro Galvanized","Pipe Type":"Steel","Pipe Connection":"Seismic Brace","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"Service Line: Up to 12\", Fasteners: 1/2\" through 3/4\", Mounting Hole: 3/8\" and 1/2\"","Service":"Used to rigidly brace and restrain piping systems subjected to seismic loads. The multi-connector adapter distributes the load into the structure through two fasteners, maximizing the load capacity of the brace or restraint. For rigid brace assemblies, the multi-connector adapter may be installed in combination with Anvil’s Fig. AF771, AF075, AF076, and AF077. For restraint assemblies, the multi-connector adapter may be installed in combination with Anvil’s Fig. AF777.","Approvals":"cULus Listed (UL 203a). Complies with the hanging and bracing requirements listed in NFPA 13.","Installation Instructions":"Install two fasteners through the fastener holes (H2). Install per the fastener manufacturer's installation instructions.; Install seismic brace or restraint through mounting hole (H1).; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.","Ordering":"Specify size, figure number, finish and description.","Category":"Support Systems > Seismic Bracing > Seismic Braces","Equivalent Products":"Anvil 779; AFCON 080; Caddy CSBMA; PHD 025; Tolco 906"}

Used to rigidly brace and restrain piping systems subjected to seismic loads. The multi-connector adapter distributes the load into the structure through two fasteners, maximizing the load capacity of the brace or restraint. For rigid brace assemblies, the multi-connector adapter may be installed in combination with Anvil’s Fig. AF771, AF075, AF076, and AF077. For restraint assemblies, the multi-connector adapter may be installed in combination with Anvil’s Fig. AF777.

Install two fasteners through the fastener holes (H2). Install per the fastener manufacturer's installation instructions.; Install seismic brace or restraint through mounting hole (H1).; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.