AF085 Joist Adapter

{"Brand":"AFCON","Figure Number":"AF085","Material":"Steel","Finish":"Plain","Pipe Type":"Steel","Pipe Connection":"Seismic Brace","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"Joist Gap: 1/2\" through 1 1/4\"","Service":"A seismic structural attachment designed to attach to steel joists. The joist adapter rigidly braces piping systems subjected to horizontal seismic loads.","Approvals":"cULus Listed (UL 203a). Complies with the hanging and bracing requirements listed in NFPA 13. Additionally, cULus Listed (UL 203) as a hanger for up to 8\" pipe.","Features":"Center loads the steel joist.","Installation Instructions":"Thread 1/2\"-13 Rod through the tapped hole in the top plate of the joist adapter.; Center the top plate and rod over the gap of the steel joist; Center the bottom bracket between the vertical flanges and allow the rod to pass through the 1/2\" thru hole.; Mount the Fig. AF075, AF076, or AF077 on the underside of the bottom bracket.; Install the 1/2-13 standard hex nut on the exposed rod. The hex nut shall be torqued to 40ft-lbs.; Installation angle determined by the brace angle of the brace pipe and the AF075, AF076, or AF077.; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.","Ordering":"Specify figure number, finish and description.","Category":"Support Systems > Seismic Bracing > Seismic Braces"}

Thread 1/2"-13 Rod through the tapped hole in the top plate of the joist adapter.; Center the top plate and rod over the gap of the steel joist; Center the bottom bracket between the vertical flanges and allow the rod to pass through the 1/2" thru hole.; Mount the Fig. AF075, AF076, or AF077 on the underside of the bottom bracket.; Install the 1/2-13 standard hex nut on the exposed rod. The hex nut shall be torqued to 40ft-lbs.; Installation angle determined by the brace angle of the brace pipe and the AF075, AF076, or AF077.; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.