550 Revolver Swivel

{"Brand":"Anvil","Figure Number":"AF550","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"3/8\" rod","Material":"Carbon Steel","Finish":"Pre-Galvanized per ASTM A653","Service":"Wall Bracket mounts on the side and underside of wood, steel, and concrete walls and beams to support up to 4\" NPS horizontal piping.","Approvals":"cULus Listed (UL 203)","Patents":"No. 6,568,642","Installation":"Mount on the side or underside of wood, steel, or concrete walls and beams using the fasteners listed in NFPA 13 and the mounting fastener table listed below.; Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely. Adjust angle as necessary.; If the Fig. 550 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.; Fire Protection applications shall also be installed per NFPA 13 requirements.","Features":"Universal fastener array optimizes the fastener size and placement for various structure types and pipe sizes.; No backing nuts are required on the rod.; Center mounting hole accepts 3/8\" and 1/2\" fasteners","Ordering":"Specify figure number and description.","Category":"Support Systems > Pipe Hangers & Supports > Structural Attachments > Wall Brackets","Equivalent Products":"AFCON 550"}

Mount on the side or underside of wood, steel, or concrete walls and beams using the fasteners listed in NFPA 13 and the mounting fastener table listed below.; Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely. Adjust angle as necessary.; If the Fig. 550 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.; Fire Protection applications shall also be installed per NFPA 13 requirements.