Support Systems · Pipe Hangers & Supports · Guides & Slides

436A Fabricated Tee

Scraped SKU: 3084 2026-06-05 01:11:17

Attributes

BrandAnvil
Figure Number436A
MaterialCarbon Steel
FinishPlain, Galvanized
Filter Attributes
{"Brand":"Anvil","Figure Number":"436A","Material":"Carbon Steel","Finish":"Plain, Galvanized","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power","Size Range":"All sizes within maximum load rating.","Service":"For the support of piping where horizontal movement resulting from expansion and contraction takes place and where a low coefficient of friction is desired.","Approvals":"Complies with Federal Specification A-A-1192A (Type 35), ANSI/MSS SP-69 and MSS SP-58 (Type 35).","Maximum Load":"As indicated at 70° F see page 141 for rating factor at higher temperatures.","Maximum Temperature":"750° F","Temperature Range at PTFE":"-20° F to 400° F","Features":"No lubrication required.; Designed to minimize heat loss.; Allows up to 3\" of insulation on Types 1, 2, 4 & 5 and up to 2-1/2\" of insulation on Types 3 & 6.; Allows up to 10\" travel standard; Weld in place design.­­­","Available Options":"Increased travels.; Increased tee heights.; End plates.; Clamps, Fig. 212 or Fig. 432.; Base plate with mounting holes; High temperature option, 1000°F (Fig. 436) Stainless steel tee slide with an insulated PTFE slide","Ordering":"Specify figure number, type, name, finish and any other option desired.","Category":"Support Systems > Pipe Hangers & Supports > Guides & Slides","Equivalent Products":"Tolco 426; Tolco 426"}
Equivalent Products{"manufacturer":"Tolco","productNumber":"426"}, {"manufacturer":"Tolco","productNumber":"426"}
Upc Codes
690291519963, 690291520136, 690291577925, 690291577932, 690291577949, 690291577956, 690291577963, 690291577970, 690291577987, 690291577994, 690291578007, 690291578014, 690291578021, 690291578038, 690291578045, 690291831850, 690291831867, 690291578052, 690291578069, 690291578076, 690291578083, 690291578090, 690291578106, 690291578113, 690291578120, 690291578137, 690291578144, 690291578151, 690291578168, 690291578175, 690291831874, 690291831881, 690291578236, 690291578243, 690291578250, 690291578267, 690291578274, 690291578281, 690291578298, 690291578304, 690291578311, 690291578328, 690291578335, 690291578342, 690291578359, 690291578366, 690291831898, 690291831904, 690291578427, 690291578434, 690291578441, 690291578458, 690291578465, 690291578472, 690291578489, 690291578496, 690291578502, 690291578519, 690291578526, 690291578533, 690291578540, 690291578557, 690291918452, 690291918469, HL436A, 69029152013, 69029157793, 69029157795, 69029157796, 69029157797, 69029157798, 69029157799, 69029157801, 69029157803, 69029183186, 69029157805, 69029157806, 69029157807, 69029157808, 69029157811, 69029157813, 69029157815, 69029157816, 69029157817, 69029157824, 69029157829, 69029157830, 69029157832, 69029157834, 69029183189, 69029157842, 69029157844, 69029157847, 69029157849, 69029157850, 69029157853, 69029157854, 69029157855, 69029157792, 69029157794, 69029157809, 69029183187, 69029157825, 69029183190, 69029157852, 69029191845, 69029191846, 69029157800, 69029157802, 69029157804, 69029183185, 69029157810, 69029157812, 69029157814, 69029183188, 69029157823, 69029157826, 69029157827, 69029157828, 69029157831, 69029157833, 69029157835, 69029157836, 69029157843, 69029157845, 69029157846, 69029157848, 69029157851, 69029151996
Algolia Submittal/resource/Pipe Slides Assembly 257, 257A, 436, 436A Submittal
Gtin690291519963

Description

Size Range: All sizes within maximum load rating. Material: Carbon steel tee, PTFE bonded slide plates and carbon steel base. Finish: Plain, Painted or Hot-Dip Galvanized (Welded after Galvanizing and Cold Spray Touched-up) Service: For the support of piping where horizontal movement resulting from expansion and contraction takes place and where a low coefficient of friction is desired. Approvals: Complies with Federal Specification A-A-1192A (Type 35), ANSI/MSS SP-69 and MSS SP-58 (Type 35). Maximum Load: As indicated at 70° F see page 141 for rating factor at higher temperatures. Maximum Temperature: 750° F Temperature Range at PTFE: -20° F to 400° F Features: No lubrication required. Designed to minimize heat loss. Allows up to 3" of insulation on Types 1, 2, 4 & 5 and up to 2-1/2" of insulation on Types 3 & 6. Allows up to 10" travel standard Weld in place design.­­­ Available Options: Increased travels. Increased tee heights. End plates. Clamps, Fig. 212 or Fig. 432. Base plate with mounting holes High temperature option, 1000°F (Fig. 436) Stainless steel tee slide with an insulated PTFE slide Ordering: Specify figure number, type, name, finish and any other option desired.

Variations (64)

0500116256

Code SystemASC Item Number

0500116546

Code SystemASC Item Number

0500555214

Code SystemASC Item Number

0500555222

Code SystemASC Item Number

0500555230

Code SystemASC Item Number

0500555248

Code SystemASC Item Number

0500555255

Code SystemASC Item Number

0500555263

Code SystemASC Item Number

0500555271

Code SystemASC Item Number

0500555289

Code SystemASC Item Number

0500555297

Code SystemASC Item Number

0500555305

Code SystemASC Item Number

0500555313

Code SystemASC Item Number

0500555321

Code SystemASC Item Number

0500555339

Code SystemASC Item Number

0500555347

Code SystemASC Item Number

0500555354

Code SystemASC Item Number

0500555438

Code SystemASC Item Number

0500555446

Code SystemASC Item Number

0500555453

Code SystemASC Item Number

0500555461

Code SystemASC Item Number

0500555479

Code SystemASC Item Number

0500555487

Code SystemASC Item Number

0500555495

Code SystemASC Item Number

0500555503

Code SystemASC Item Number

0500555511

Code SystemASC Item Number

0500555529

Code SystemASC Item Number

0500555537

Code SystemASC Item Number

0500555545

Code SystemASC Item Number

0500555552

Code SystemASC Item Number

0500555560

Code SystemASC Item Number

0500555578

Code SystemASC Item Number

0500555701

Code SystemASC Item Number

0500555719

Code SystemASC Item Number

0500555727

Code SystemASC Item Number

0500555735

Code SystemASC Item Number

0500555743

Code SystemASC Item Number

0500555750

Code SystemASC Item Number

0500555768

Code SystemASC Item Number

0500555776

Code SystemASC Item Number

0500555784

Code SystemASC Item Number

0500555792

Code SystemASC Item Number

0500555800

Code SystemASC Item Number

0500555818

Code SystemASC Item Number

0500555826

Code SystemASC Item Number

0500555834

Code SystemASC Item Number

0500555842

Code SystemASC Item Number

0500555859

Code SystemASC Item Number

0500555982

Code SystemASC Item Number

0500555990

Code SystemASC Item Number

0500556006

Code SystemASC Item Number

0500556014

Code SystemASC Item Number

0500556022

Code SystemASC Item Number

0500556030

Code SystemASC Item Number

0500556048

Code SystemASC Item Number

0500556055

Code SystemASC Item Number

0500556063

Code SystemASC Item Number

0500556071

Code SystemASC Item Number

0500556089

Code SystemASC Item Number

0500556097

Code SystemASC Item Number

0500556105

Code SystemASC Item Number

0500556113

Code SystemASC Item Number

0500556121

Code SystemASC Item Number

0500556139

Code SystemASC Item Number

Specifications

BrandAnvil
Figure Number436A
MaterialCarbon Steel
FinishPlain, Galvanized
SolutionsMechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power
Size RangeAll sizes within maximum load rating.
ServiceFor the support of piping where horizontal movement resulting from expansion and contraction takes place and where a low coefficient of friction is desired.
ApprovalsComplies with Federal Specification A-A-1192A (Type 35), ANSI/MSS SP-69 and MSS SP-58 (Type 35).
Maximum LoadAs indicated at 70° F see page 141 for rating factor at higher temperatures.
Maximum Temperature750° F
Temperature Range at PTFE-20° F to 400° F
FeaturesNo lubrication required.; Designed to minimize heat loss.; Allows up to 3" of insulation on Types 1, 2, 4 & 5 and up to 2-1/2" of insulation on Types 3 & 6.; Allows up to 10" travel standard; Weld in place design.­­­
Available OptionsIncreased travels.; Increased tee heights.; End plates.; Clamps, Fig. 212 or Fig. 432.; Base plate with mounting holes; High temperature option, 1000°F (Fig. 436) Stainless steel tee slide with an insulated PTFE slide
OrderingSpecify figure number, type, name, finish and any other option desired.
CategorySupport Systems > Pipe Hangers & Supports > Guides & Slides
Equivalent ProductsTolco 426; Tolco 426

PDF Documents

[Product Data Sheets] Pipe Slides Assembly 257, 257A, 436, 436A Submittal Open PDF
[Product Resources] Anvil Pipe Hangers & Supports Submittal Catalog Open PDF
[Product Resources] Anvil-Strut™ Metal Framing Product and H-Block Catalog Open PDF