Support Systems · Pipe Hangers & Supports · Guides & Slides

257A Structural Tee

Scraped SKU: 3081 2026-06-05 01:11:13

Attributes

BrandAnvil
Figure Number257A
MaterialCarbon Steel
FinishPlain, Galvanized
Filter Attributes
{"Brand":"Anvil","Figure Number":"257A","Material":"Carbon Steel","Finish":"Plain, Galvanized","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power","Size Range":"All sizes within maximum load rating.","Service":"For the support of piping where horizontal movement resulting from expansion and contraction takes place and where a low coefficient of friction is desired.","Approvals":"Complies with Federal Specification A-A-1192A (Type 35), ANSI/MSS SP-69 and MSS SP-58 (Type 35).","Maximum Load":"As indicated at 70° F see page 141 for rating factor at higher temperatures.","Maximum Temperature":"750° F","Temperature Range at PTFE":"-20° F to 400° F","Features":"No lubrication required.; Designed to minimize heat loss.; Allows up to 3\" of insulation on Types 1, 2, 4 & 5 and up to 2-1/2\" of insulation on Types 3 & 6.; Allows up to 10\" travel standard; Weld in place design.­­­","Available Options":"Increased travels.; Increased tee heights.; End plates.; Clamps, Fig. 212 or Fig. 432.; Base plate with mounting holes; High temperature option, 1000°F (Fig. 436) Stainless steel tee slide with an insulated PTFE slide","Ordering":"Specify figure number, type, name, finish and any other option desired.","Category":"Support Systems > Pipe Hangers & Supports > Guides & Slides","Equivalent Products":"B-Line B3891; B-Line B3891"}
Equivalent Products{"manufacturer":"B-Line","productNumber":"B3891"}, {"manufacturer":"B-Line","productNumber":"B3891"}
Upc Codes
690291519833, 690291830945, 690291569449, 690291831089, 690291569456, 690291569463, 690291831096, 690291569470, 690291569487, 690291569494, 690291569500, 690291569517, 690291569524, 690291569531, 690291569548, 690291569555, 690291569562, 690291569579, 690291569630, 690291918223, 690291569647, 690291569654, 690291569661, 690291569678, 690291569685, 690291569692, 690291569708, 690291569715, 690291569722, 690291569739, 690291569753, 690291699009, 690291569760, 690291918230, 690291569777, 690291569784, 690291569791, 690291569807, 690291569814, 690291569821, 690291569838, 690291569845, 690291569852, 690291569869, 690291569876, 690291569883, 690291569890, 690291831102, 690291831119, 690291569906, 690291569913, 690291569920, 690291569937, 690291569944, 690291569951, 690291569968, 690291569975, 690291569982, 690291569999, 690291570001, 690291570018, 690291570025, 690291831126, 690291831133, 69029183109, 69029156947, 69029156948, 69029156964, 69029156969, 69029156975, 69029156976, 69029191823, 69029156980, 69029156982, 69029156984, 69029156989, 69029183110, 69029156999, 69029156944, 69029156949, 69029156950, 69029156952, 69029156953, 69029156954, 69029156957, 69029156963, 69029191822, 69029156966, 69029156967, 69029156968, 69029156970, 69029156972, 69029156979, 69029156981, 69029156983, 69029156985, 69029156986, 69029156987, 69029156988, 69029183111, 69029156991, 69029156993, 69029156995, 69029156996, 69029156997, 69029156998, 69029157001, 69029157002, 69029151983, 69029183108, 69029156945, 69029156946, 69029156951, 69029156955, 69029156956, 69029156965, 69029156971, 69029156973, 69029169900, 69029156977, 69029156978, 69029156990, 69029156992, 69029156994, 69029157000, 69029183112, 69029183113, 69029183094, HL257A
Algolia Submittal/resource/Pipe Slides Assembly 257, 257A, 436, 436A Submittal
Gtin690291519833

Description

Size Range: All sizes within maximum load rating. Material: Carbon steel tee, PTFE bonded slide plates and carbon steel base. Finish: Plain, Painted or Hot-Dip Galvanized (Welded after Galvanizing and Cold Spray Touched-up) Service: For the support of piping where horizontal movement resulting from expansion and contraction takes place and where a low coefficient of friction is desired. Approvals: Complies with Federal Specification A-A-1192A (Type 35), ANSI/MSS SP-69 and MSS SP-58 (Type 35). Maximum Load: As indicated at 70° F see page 141 for rating factor at higher temperatures. Maximum Temperature: 750° F Temperature Range at PTFE: -20° F to 400° F Features: No lubrication required. Designed to minimize heat loss. Allows up to 3" of insulation on Types 1, 2, 4 & 5 and up to 2-1/2" of insulation on Types 3 & 6. Allows up to 10" travel standard Weld in place design.­­­ Available Options: Increased travels. Increased tee heights. End plates. Clamps, Fig. 212 or Fig. 432. Base plate with mounting holes High temperature option, 1000°F (Fig. 436) Stainless steel tee slide with an insulated PTFE slide Ordering: Specify figure number, type, name, finish and any other option desired.

Variations (64)

0500116009

Code SystemASC Item Number

0500116413

Code SystemASC Item Number

0500542055

Code SystemASC Item Number

0500542063

Code SystemASC Item Number

0500542071

Code SystemASC Item Number

0500542089

Code SystemASC Item Number

0500542097

Code SystemASC Item Number

0500542105

Code SystemASC Item Number

0500542113

Code SystemASC Item Number

0500542121

Code SystemASC Item Number

0500542147

Code SystemASC Item Number

0500542154

Code SystemASC Item Number

0500542188

Code SystemASC Item Number

0500542212

Code SystemASC Item Number

0500542246

Code SystemASC Item Number

0500542261

Code SystemASC Item Number

0500542287

Code SystemASC Item Number

0500542303

Code SystemASC Item Number

0500542451

Code SystemASC Item Number

0500542469

Code SystemASC Item Number

0500542477

Code SystemASC Item Number

0500542485

Code SystemASC Item Number

0500542493

Code SystemASC Item Number

0500542501

Code SystemASC Item Number

0500542519

Code SystemASC Item Number

0500542527

Code SystemASC Item Number

0500542535

Code SystemASC Item Number

0500542543

Code SystemASC Item Number

0500542550

Code SystemASC Item Number

0500542568

Code SystemASC Item Number

0500542576

Code SystemASC Item Number

0500542584

Code SystemASC Item Number

0500542592

Code SystemASC Item Number

0500542600

Code SystemASC Item Number

0500542691

Code SystemASC Item Number

0500542709

Code SystemASC Item Number

0500542717

Code SystemASC Item Number

0500542725

Code SystemASC Item Number

0500542733

Code SystemASC Item Number

0500542741

Code SystemASC Item Number

0500542758

Code SystemASC Item Number

0500542766

Code SystemASC Item Number

0500542774

Code SystemASC Item Number

0500542782

Code SystemASC Item Number

0500542790

Code SystemASC Item Number

0500542808

Code SystemASC Item Number

0500542816

Code SystemASC Item Number

0500542824

Code SystemASC Item Number

0500542832

Code SystemASC Item Number

0500542915

Code SystemASC Item Number

0500542923

Code SystemASC Item Number

0500542931

Code SystemASC Item Number

0500542949

Code SystemASC Item Number

0500542956

Code SystemASC Item Number

0500542964

Code SystemASC Item Number

0500542972

Code SystemASC Item Number

0500542980

Code SystemASC Item Number

0500542998

Code SystemASC Item Number

0500543004

Code SystemASC Item Number

0500543012

Code SystemASC Item Number

0500543020

Code SystemASC Item Number

0500543038

Code SystemASC Item Number

0500543046

Code SystemASC Item Number

0500543053

Code SystemASC Item Number

Specifications

BrandAnvil
Figure Number257A
MaterialCarbon Steel
FinishPlain, Galvanized
SolutionsMechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power
Size RangeAll sizes within maximum load rating.
ServiceFor the support of piping where horizontal movement resulting from expansion and contraction takes place and where a low coefficient of friction is desired.
ApprovalsComplies with Federal Specification A-A-1192A (Type 35), ANSI/MSS SP-69 and MSS SP-58 (Type 35).
Maximum LoadAs indicated at 70° F see page 141 for rating factor at higher temperatures.
Maximum Temperature750° F
Temperature Range at PTFE-20° F to 400° F
FeaturesNo lubrication required.; Designed to minimize heat loss.; Allows up to 3" of insulation on Types 1, 2, 4 & 5 and up to 2-1/2" of insulation on Types 3 & 6.; Allows up to 10" travel standard; Weld in place design.­­­
Available OptionsIncreased travels.; Increased tee heights.; End plates.; Clamps, Fig. 212 or Fig. 432.; Base plate with mounting holes; High temperature option, 1000°F (Fig. 436) Stainless steel tee slide with an insulated PTFE slide
OrderingSpecify figure number, type, name, finish and any other option desired.
CategorySupport Systems > Pipe Hangers & Supports > Guides & Slides
Equivalent ProductsB-Line B3891; B-Line B3891

PDF Documents

[Product Data Sheets] Pipe Slides Assembly 257, 257A, 436, 436A Submittal Open PDF
[Product Resources] Anvil Pipe Hangers & Supports Submittal Catalog Open PDF
[Product Resources] Anvil-Strut™ Metal Framing Product and H-Block Catalog Open PDF