Attributes
| Brand | Anvil |
|---|---|
| Figure Number | 86 |
| Material | Malleable iron(Clamp), Hardened Steel (Cup Point Set Screw) |
| Finish | Plain, Zinc Plated |
| Filter Attributes | {"Brand":"Anvil","Figure Number":"86","Material":"Malleable iron(Clamp), Hardened Steel (Cup Point Set Screw)","Finish":"Plain, Zinc Plated","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"3/8\" through 3/4\"","Service":"Recommended for attachment to “W” and “M” beams where thickness of flange Z does not exceed 0.75\". When clamp is used with Fig. 89 retaining clip, flange thickness may not exceed 0.62\".","Approvals":"Complies with Federal Specification A-A-1192A (Type 23), WW-H-171-E (Type 23), ANSI/MSS SP-69 and MSS SP-58 (Type 23). UL, ULC Listed (Sizes 3/8\", 1/2\", 5/8\" and 3/4\") and FM Approved (Size 3/8\").","Installation":"Follow recommended set screw torque values per MSS-SP-69. The Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam.","Features":"Malleable body assures: Uniform quality and strength. Full thread engagement.; Uniform quality and strength.; Full thread engagement.; Hardened steel cup point set screw for securing to beam flange.; Ribbed design of clamp provides added strength.","Ordering":"Specify rod size, figure number, name, length of retaining clip, if desired. (Add 2\" to flange width of beam to arrive at proper length of retaining clip.) If required length is not standard, order next longer standard.","Category":"Support Systems > Pipe Hangers & Supports > Structural Attachments > Beam Clamps","Equivalent Products":"Superstrut M775L; B-Line B3036L; Erico 255L; PHD 270; C&P 193; Empire 23L"} |
| Equivalent Products | {"manufacturer":"Superstrut","productNumber":"M775L"}, {"manufacturer":"B-Line","productNumber":"B3036L"}, {"manufacturer":"Erico","productNumber":"255L"}, {"manufacturer":"PHD","productNumber":"270"}, {"manufacturer":"C&P","productNumber":"193"}, {"manufacturer":"Empire","productNumber":"23L"} |
| Upc Codes | 690291134180, 690291134197, 690291134203, 690291134210, 690291144080, 690291144097, 690291144103, 690291144110, 69029114409, 69029113419, 69029113420, 69029114408, 69029114410, 69029114411, 69029113418, 69029113421 |
| Algolia Submittal | /resource/86 C-Clamp w/ Set Screw & Lock Nut Submittal |
| Gtin | 690291134180 |
Description
Size Range: 3/8" through 3/4" Material: Malleable iron clamp; hardened steel cup point set screw. Finish: Plain or Zinc Plated (Hot-Dip Galvanized optional) Service: Recommended for attachment to “W” and “M” beams where thickness of flange Z does not exceed 0.75". When clamp is used with Fig. 89 retaining clip, flange thickness may not exceed 0.62". Approvals: Complies with Federal Specification A-A-1192A (Type 23), WW-H-171-E (Type 23), ANSI/MSS SP-69 and MSS SP-58 (Type 23). UL, ULC Listed (Sizes 3/8", 1/2", 5/8" and 3/4") and FM Approved (Size 3/8"). Installation: Follow recommended set screw torque values per MSS-SP-69. The Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam. Features: Malleable body assures: Uniform quality and strength. Full thread engagement. Hardened steel cup point set screw for securing to beam flange. Ribbed design of clamp provides added strength. Ordering: Specify rod size, figure number, name, length of retaining clip, if desired. (Add 2" to flange width of beam to arrive at proper length of retaining clip.) If required length is not standard, order next longer standard.
Variations (8)
0500007406
| Code System | ASC Item Number |
|---|
0500007414
| Code System | ASC Item Number |
|---|
0500007422
| Code System | ASC Item Number |
|---|
0500007430
| Code System | ASC Item Number |
|---|
0500303003
| Code System | ASC Item Number |
|---|
0500303011
| Code System | ASC Item Number |
|---|
0500303029
| Code System | ASC Item Number |
|---|
0500303037
| Code System | ASC Item Number |
|---|
Specifications
| Brand | Anvil |
|---|---|
| Figure Number | 86 |
| Material | Malleable iron(Clamp), Hardened Steel (Cup Point Set Screw) |
| Finish | Plain, Zinc Plated |
| Solutions | Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater |
| Size Range | 3/8" through 3/4" |
| Service | Recommended for attachment to “W” and “M” beams where thickness of flange Z does not exceed 0.75". When clamp is used with Fig. 89 retaining clip, flange thickness may not exceed 0.62". |
| Approvals | Complies with Federal Specification A-A-1192A (Type 23), WW-H-171-E (Type 23), ANSI/MSS SP-69 and MSS SP-58 (Type 23). UL, ULC Listed (Sizes 3/8", 1/2", 5/8" and 3/4") and FM Approved (Size 3/8"). |
| Installation | Follow recommended set screw torque values per MSS-SP-69. The Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam. |
| Features | Malleable body assures: Uniform quality and strength. Full thread engagement.; Uniform quality and strength.; Full thread engagement.; Hardened steel cup point set screw for securing to beam flange.; Ribbed design of clamp provides added strength. |
| Ordering | Specify rod size, figure number, name, length of retaining clip, if desired. (Add 2" to flange width of beam to arrive at proper length of retaining clip.) If required length is not standard, order next longer standard. |
| Category | Support Systems > Pipe Hangers & Supports > Structural Attachments > Beam Clamps |
| Equivalent Products | Superstrut M775L; B-Line B3036L; Erico 255L; PHD 270; C&P 193; Empire 23L |
PDF Documents
[Product Data Sheets] 86 C-Clamp w/ Set Screw & Lock Nut Submittal
Open PDF
[Product Resources] Anvil Pipe Hangers & Supports Submittal Catalog
Open PDF
[Product Resources] Anvil-Strut™ Metal Framing Product and H-Block Catalog
Open PDF
[Approvals and Certifications] Anvil Pipe Hangers, Ductile Iron & Malleable Iron - Columbia Plant - Certificate of Compliance
Open PDF