AF086 Adjustable Structural Brace Attachment

{"Brand":"AFCON","Figure Number":"AF086","Material":"Steel","Finish":"Plain","Pipe Type":"Steel","Pipe Connection":"Seismic Brace","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"Flange Thickness: 0.250\" - 1.250\" (6.35-31.75 mm)","Service":"A seismic structural attachment designed to attach to steel I-beams. The structural brace attachment rigidly braces piping systems subjected to horizontal seismic loads.","Approvals":"cULus Listed (UL 203a) and FM Approved (FM 1950-10 & FM 1950-13). Complies with the hanging and bracing requirements listed in NFPA 13. Additionally, cULus Listed (UL 203) as a hanger for up to 8\" pipe.","Features":"Shear off nuts provide a visual indication that the desired torque value has been achieved.","Installation Instructions":"Insert one 1/2\" x 1 1/2\" hex bolt through the mounting hole of one bracket.; Place both brackets on a horizontal steel flange.; Install two 1/2\"-13 studs or bolts with the shear off nuts through the mounting slots on both brackets. Studs or bolts manufactured per ASTM A307 or equivalent.; Torque shear off nuts evenly and equally until the heads shear off.; Install the 1/2\" x 1 1/2\" mounting bolt through the 1/2\" AF075, AF076, or AF077 mounting hole. The mounting bolt shall be installed wrench tight (typically finger tight plus 1/2 to 1/2 turns).; Installation angle determined by the brace angle of the brace pipe and the AF075, AF076, or AF077.; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.","Patent":"No. 6,334,285","Category":"Support Systems > Seismic Bracing > Seismic Braces","Equivalent Products":"Anvil 772; AFCON 086; Caddy CSBIB, CSBBC; Tolco 800"}

Insert one 1/2" x 1 1/2" hex bolt through the mounting hole of one bracket.; Place both brackets on a horizontal steel flange.; Install two 1/2"-13 studs or bolts with the shear off nuts through the mounting slots on both brackets. Studs or bolts manufactured per ASTM A307 or equivalent.; Torque shear off nuts evenly and equally until the heads shear off.; Install the 1/2" x 1 1/2" mounting bolt through the 1/2" AF075, AF076, or AF077 mounting hole. The mounting bolt shall be installed wrench tight (typically finger tight plus 1/2 to 1/2 turns).; Installation angle determined by the brace angle of the brace pipe and the AF075, AF076, or AF077.; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.