186 CPVC Two Hole Pipe Strap

{"Brand":"Anvil","Figure Number":"186","Material":"20Ga Steel Sheet","Finish":"Pre-Galvanized Carbon Steel","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power","Size Range":"3/4\" through 2\"","Service":"Hanger for CPVC pipe in the horizontal position on the bottom and side of structural wood beams, composite beams and Steel 20 Ga. (min.). Can be used as a restrainer when installed on top of structural wood beams, for limiting pipe movement due to thrust loads during sprinkler system start-up. It can also be used as a guide to limit movement for pipe in the vertical position. When used on composite wood beams, web thickness must be 3/4\" or greater.","Approvals":"UL and ULC Listed.","Installation":"Snap hanger over pipe.; Secure hanger to mounting surface with screws provided.; Do not make adjustments to hanger mounting flanges that result in clamping the pipe to the mounting surface. Pipe must be allowed to move freely through hanger.; Steel applications require two (2) #14 x 1\" hex washer head self-drilling TEK screws. Not Supplied. Part Number STD-0090.","Features":"Beveled edge design helps protect the CPVC pipe from any rough surface.; Easily attaches to wood structure with #10 x 1\" hex washer head self threading screw supplied with product. No pre-drilling required.","Ordering":"Specify CPVC pipe size, figure number and description.","Category":"Support Systems > Pipe Hangers & Supports > Pipe Attachments > CPVC","Equivalent Products":"AFCON 510"}

Hanger for CPVC pipe in the horizontal position on the bottom and side of structural wood beams, composite beams and Steel 20 Ga. (min.). Can be used as a restrainer when installed on top of structural wood beams, for limiting pipe movement due to thrust loads during sprinkler system start-up. It can also be used as a guide to limit movement for pipe in the vertical position. When used on composite wood beams, web thickness must be 3/4" or greater.

Snap hanger over pipe.; Secure hanger to mounting surface with screws provided.; Do not make adjustments to hanger mounting flanges that result in clamping the pipe to the mounting surface. Pipe must be allowed to move freely through hanger.; Steel applications require two (2) #14 x 1" hex washer head self-drilling TEK screws. Not Supplied. Part Number STD-0090.