AF777 Swivel Attachment

{"Brand":"AFCON","Figure Number":"AF777","Material":"Steel","Finish":"Zinc Plated, Galvanized","Pipe Type":"Steel","Pipe Connection":"Seismic Restraint","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"3/8\" through 1/2\" rod","Hanger Service":"Swivel hanger designed to support horizontal piping from angled structures. Listed for installation at angles between 0 and 90 degrees.","Restraint Service":"May be installed as a branch line restraint per the requirements of NFPA 13. The AF777 may be installed directly to the structure or to the Fig. AF779.","Approvals":"cULus Listed (UL 203 and UL 203a – 3/8\" only). Complies with the hanging and restraint requirements listed in NFPA 13.","Installation":"Install mounting bolt into structure or structural attachment and tighten hex nut until the yoke (U-Shaped Bracket) is tight against the structure or attachment.; Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely.; Adjust angle as necessary.; If the AF777 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.; Fire Protection applications shall also be installed per NFPA 13 requirements.","Features":"Full 90 degree rotation allows for installation at any angle.","Ordering":"Specify figure number, finish, size, and description.","Category":"Support Systems > Seismic Bracing > Seismic Restraints","Equivalent Products":"Anvil 777; AFCON 615; Caddy CSBBRS; PHD 020; Tolco 75"}

Install mounting bolt into structure or structural attachment and tighten hex nut until the yoke (U-Shaped Bracket) is tight against the structure or attachment.; Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely.; Adjust angle as necessary.; If the AF777 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.; Fire Protection applications shall also be installed per NFPA 13 requirements.