AF087 Structural Brace Attachment

{"Brand":"AFCON","Figure Number":"AF087","Material":"Steel","Finish":"Plain","Pipe Type":"Steel","Pipe Connection":"Seismic Brace","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Size Range":"Flange Thickness: Up to 1/2\" thick (UL), Up to 3/8\" thick (FM)","Service":"A seismic structural attachment designed to attach to steel I-beams, flanges, and joists. The Structural Brace Attachment rigidly braces piping systems subjected to horizontal seismic loads.","Approvals":"cULus Listed (UL 203a) and FM Approved (FM 1950-10 & FM 1950-13). Complies with the hanging and bracing requirements listed in NFPA 13.","Features":"Shear off bolt provides a visual indication that the desired torque value has been achieved.","Installation Instructions":"Place structural brace attachment on a horizontal or vertical steel flange.; Torque shear off bolts evenly and equally until the head shears off.; Install the 1/2\" mounting bolt through the 1/2\" AF075, AF076, or AF077 mounting hole. The mounting bolt shall be installed wrench tight (typically finger tight plus 1/4 to 1/2 turns).; Installation angle determined by the brace angle of the brace pipe and the AF075, AF076, or AF077.; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.","Patent":"No. 6,629,678","Ordering":"Specify figure number, finish and description.","Category":"Support Systems > Seismic Bracing > Seismic Braces","Equivalent Products":"Anvil 778; AFCON 087; Caddy CSBBARJEG; PHD 035; Tolco 825"}

{"manufacturer":"Anvil","productNumber":"778"}, {"manufacturer":"AFCON","productNumber":"087"}, {"manufacturer":"Caddy","productNumber":"CSBBARJEG"}, {"manufacturer":"PHD","productNumber":"035"}, {"manufacturer":"Tolco","productNumber":"825"}

Place structural brace attachment on a horizontal or vertical steel flange.; Torque shear off bolts evenly and equally until the head shears off.; Install the 1/2" mounting bolt through the 1/2" AF075, AF076, or AF077 mounting hole. The mounting bolt shall be installed wrench tight (typically finger tight plus 1/4 to 1/2 turns).; Installation angle determined by the brace angle of the brace pipe and the AF075, AF076, or AF077.; Fire Protection applications shall also be installed per the requirements of NFPA 13 and local codes.