Attributes
| Brand | Anvil |
|---|---|
| Figure Number | 228 |
| Material | Forged Steel |
| Finish | Plain, Zinc Plated |
| Filter Attributes | {"Brand":"Anvil","Figure Number":"228","Material":"Forged Steel","Finish":"Plain, Zinc Plated","Pipe Type":"Steel","Pipe Connection":"Clamp","Solutions":"Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater","Service":"For suspension of heavy loads from beams with flange widths to 15\" and flange thickness to 1.031.","Approvals":"Complies with Federal Specification A-A-1192A (Type 28 without links; Type 29 with links), WW-H-171-E (Type 30 & 31), ANSI/MSS SP-69 and MSS SP-58 (Type 28 without links; Type 29 with links).","Installation":"Fit jaws over edges of lower beam flange and tighten nuts on tie rod to lock clamp in place.","Features":"Upper nut is tapped to any specified size up to the maximum rod size.; Quickly, easily, economically installed.; Tie rod insures a tight non-slip fit to the beam.; Clamps are available, tapped to any specified rod size up to the maximum rod size.","Ordering":"Specify clamp size, figure number, name, rod size and finish.","Category":"Support Systems > Pipe Hangers & Supports > Structural Attachments > Beam Clamps","Equivalent Products":"Superstrut M732-H; C&P 293; Superstrut M732-H; C&P 293"} |
| Equivalent Products | {"manufacturer":"Superstrut","productNumber":"M732-H"}, {"manufacturer":"C&P","productNumber":"293"}, {"manufacturer":"Superstrut","productNumber":"M732-H"}, {"manufacturer":"C&P","productNumber":"293"} |
| Upc Codes | 690291424014, 690291139710, 690291139727, 690291822452, 690291822469, 690291139734, 690291139741, 690291139758, 690291139765, 690291533594, 690291480492, 690291139772, 690291139789, 690291542435, 690291822476, 690291542442, 690291480508, 690291822483, 690291822490, 690291822506, 690291822513, 690291822520, 690291822537, 690291822544, 690291822551, 690291139796, 690291822568, 690291531545, 690291822575, 690291822582, 690291822599, 690291832642, 690291832659, 690291832666, 690291832673, 690291832680, 690291832697, 690291832703, 690291832710, 690291832727, 690291832734, 690291832741, 690291832758, 690291832765, 690291832772, 690291832789, 690291832796, 690291832802, 690291832819, 690291832826, 690291832833, 690291832840, 690291832857, 690291832864, 690291832871, 690291832888, 690291832895, 690291832901, 690291832918, 690291832925, 690291832932, 690291832949, 69029113973, 69029113977, 69029113978, 69029182251, 69029182252, 69029182255, 69029183267, 69029183269, 69029183270, 69029183272, 69029183281, 69029183282, 69029183284, 69029183285, 69029183290, 69029142401, 69029113971, 69029113972, 69029182246, 69029113974, 69029113975, 69029113976, 69029153359, 69029148049, 69029154243, 69029182247, 69029148050, 69029182248, 69029182249, 69029182250, 69029113979, 69029182256, 69029153154, 69029182258, 69029183264, 69029183265, 69029183266, 69029183271, 69029183273, 69029183274, 69029183275, 69029183277, 69029183279, 69029183280, 69029183286, 69029183288, 69029183293, 69029183294, 69029182245, 69029154244, 69029182253, 69029182254, 69029182257, 69029182259, 69029183268, 69029183276, 69029183278, 69029183283, 69029183287, 69029183289, 69029183291, 69029183292, HL228 |
| Algolia Submittal | /resource/228 Universal Forged Steel Beam Clamp Submittal |
| Gtin | 690291424014 |
Description
Material: Forged steel Finish: Plain or Zinc Plated Service: For suspension of heavy loads from beams with flange widths to 15" and flange thickness to 1.031. Approvals: Complies with Federal Specification A-A-1192A (Type 28 without links; Type 29 with links), WW-H-171-E (Type 30 & 31), ANSI/MSS SP-69 and MSS SP-58 (Type 28 without links; Type 29 with links). Installation: Fit jaws over edges of lower beam flange and tighten nuts on tie rod to lock clamp in place. Features: Upper nut is tapped to any specified size up to the maximum rod size. Quickly, easily, economically installed. Tie rod insures a tight non-slip fit to the beam. Clamps are available, tapped to any specified rod size up to the maximum rod size. Ordering: Specify clamp size, figure number, name, rod size and finish. Note: The application of a load to a structural beam by means of a beam clamp produces a transverse stress, perpendicular to the axis of the beam, in the flange to which the load is applied. Size per load, beam flange width and rod size
Variations (62)
0500104104
| Code System | ASC Item Number |
|---|
0500104112
| Code System | ASC Item Number |
|---|
0500104120
| Code System | ASC Item Number |
|---|
0500104203
| Code System | ASC Item Number |
|---|
0500104211
| Code System | ASC Item Number |
|---|
0500104229
| Code System | ASC Item Number |
|---|
0500104237
| Code System | ASC Item Number |
|---|
0500104245
| Code System | ASC Item Number |
|---|
0500104302
| Code System | ASC Item Number |
|---|
0500104310
| Code System | ASC Item Number |
|---|
0500104328
| Code System | ASC Item Number |
|---|
0500104336
| Code System | ASC Item Number |
|---|
0500104344
| Code System | ASC Item Number |
|---|
0500104385
| Code System | ASC Item Number |
|---|
0500104401
| Code System | ASC Item Number |
|---|
0500104427
| Code System | ASC Item Number |
|---|
0500104435
| Code System | ASC Item Number |
|---|
0500104443
| Code System | ASC Item Number |
|---|
0500104450
| Code System | ASC Item Number |
|---|
0500104468
| Code System | ASC Item Number |
|---|
0500104476
| Code System | ASC Item Number |
|---|
0500104484
| Code System | ASC Item Number |
|---|
0500104500
| Code System | ASC Item Number |
|---|
0500104518
| Code System | ASC Item Number |
|---|
0500104526
| Code System | ASC Item Number |
|---|
0500104534
| Code System | ASC Item Number |
|---|
0500104542
| Code System | ASC Item Number |
|---|
0500104559
| Code System | ASC Item Number |
|---|
0500104567
| Code System | ASC Item Number |
|---|
0500104575
| Code System | ASC Item Number |
|---|
0500104583
| Code System | ASC Item Number |
|---|
0500345418
| Code System | ASC Item Number |
|---|
0500345426
| Code System | ASC Item Number |
|---|
0500345434
| Code System | ASC Item Number |
|---|
0500345442
| Code System | ASC Item Number |
|---|
0500345459
| Code System | ASC Item Number |
|---|
0500345467
| Code System | ASC Item Number |
|---|
0500345475
| Code System | ASC Item Number |
|---|
0500345483
| Code System | ASC Item Number |
|---|
0500345491
| Code System | ASC Item Number |
|---|
0500345509
| Code System | ASC Item Number |
|---|
0500345517
| Code System | ASC Item Number |
|---|
0500345525
| Code System | ASC Item Number |
|---|
0500345533
| Code System | ASC Item Number |
|---|
0500345541
| Code System | ASC Item Number |
|---|
0500345558
| Code System | ASC Item Number |
|---|
0500345566
| Code System | ASC Item Number |
|---|
0500345574
| Code System | ASC Item Number |
|---|
0500345582
| Code System | ASC Item Number |
|---|
0500345590
| Code System | ASC Item Number |
|---|
0500345608
| Code System | ASC Item Number |
|---|
0500345616
| Code System | ASC Item Number |
|---|
0500345624
| Code System | ASC Item Number |
|---|
0500345632
| Code System | ASC Item Number |
|---|
0500345640
| Code System | ASC Item Number |
|---|
0500345657
| Code System | ASC Item Number |
|---|
0500345665
| Code System | ASC Item Number |
|---|
0500345673
| Code System | ASC Item Number |
|---|
0500345681
| Code System | ASC Item Number |
|---|
0500345699
| Code System | ASC Item Number |
|---|
0500345707
| Code System | ASC Item Number |
|---|
0500345715
| Code System | ASC Item Number |
|---|
Specifications
| Brand | Anvil |
|---|---|
| Figure Number | 228 |
| Material | Forged Steel |
| Finish | Plain, Zinc Plated |
| Pipe Type | Steel |
| Pipe Connection | Clamp |
| Solutions | Mechanical & Plumbing Systems, Commercial & Residential, Data Centers, Industrial, Energy & Power, Mining, Fire Protection, Oil & Gas, Water & Wastewater |
| Service | For suspension of heavy loads from beams with flange widths to 15" and flange thickness to 1.031. |
| Approvals | Complies with Federal Specification A-A-1192A (Type 28 without links; Type 29 with links), WW-H-171-E (Type 30 & 31), ANSI/MSS SP-69 and MSS SP-58 (Type 28 without links; Type 29 with links). |
| Installation | Fit jaws over edges of lower beam flange and tighten nuts on tie rod to lock clamp in place. |
| Features | Upper nut is tapped to any specified size up to the maximum rod size.; Quickly, easily, economically installed.; Tie rod insures a tight non-slip fit to the beam.; Clamps are available, tapped to any specified rod size up to the maximum rod size. |
| Ordering | Specify clamp size, figure number, name, rod size and finish. |
| Category | Support Systems > Pipe Hangers & Supports > Structural Attachments > Beam Clamps |
| Equivalent Products | Superstrut M732-H; C&P 293; Superstrut M732-H; C&P 293 |